NNTPGrab

==================

NNTPGrab ChangeLog

==================

+-----------------+

| NNTPGrab 0.6.91 |

+-----------------+

Released at Wednesday December 8 2010

General changes:

- Made the Qt frontend the default frontend for Win32, Win64 and OSX environments

- Added a new ./configure option: --disable-par2cmdline-check

- Only show the filename without the complete path in the GUI

  while repairing and unpacking files

- Added support for GNUTLS instead of OpenSSL

- Made the various libraries compatible with recent versions of gobject-introspection

- Added support to shut down the system when using KDE

- Reduced some overhead between the glue layer and the frontends

- Allow frontends to indicate whether they want to receive log messages or

  not (disabled by default). This reduces the load in regular environments

Changes in the NNTPGrab Core:

- When the user changes the 'Temp directory' in the configuration all

  downloads didn't get decoded properly until the program was restarted. Fixed

- On some environments the program could give an 'Unable to resolve dependency'

  error on startup of the program. Fixed. Bug #49

- A harmless error message could get shown on startup on Win32/Win64 due

  to an older version of the example plugin being bundled in the

  NNTPGrab 0.6.90 setup. Fixed

- Automatic shutdown didn't work when the download queue contained 'Skipped' tasks. Fixed

- Refuse to accept configuration changes when the download folder, temp

  folder or automatic import folder refer to invalid paths

- A regression got introduced in NNTPGrab 0.6.2 which caused configuration changes

  in the port number of usenet servers to be ignored on Win32/Win64. Fixed

- Fixed an compile error which could occur when using the ./configure argument --disable-ssl

- Single file archives didn't get deleted automatically after an unpack. Fixed

- Added the characters '<' and '>' to the list of forbidden characters in collection names

- A regression was introduced in NNTPGrab 0.6.90 which causes the PAR2 repair

  to fail when using par2cmdline (instead of par2_tbb). Fixed. Bug #52

- Optimized the measuring of the download speed by using atomic operations instead of mutex operations

- Fixed a race condition in the core library which could cause some warnings

- Fixed an issue which could cause the initialisation of the NNTPGrab Core to

  succeed even if there was an error

- Fixed a possible schedular deadlock which could be triggered when

  an error during the decoding has occured

- Don't emit a log message whenever a throttle action occurs

Changes in the JSON-RPC plugin:

- Implemented importing NZB files using a HTTP POST request in

  the embedded webserver. Feature #10

- Added a new JSON-RPC function called 'schedular_foreach_task' which is much

  more scalable than the original 'schedular_get_all_tasks' function. Fixes #53

- From now on an error message will be returned when a JSON-RPC method

  is called which doesn't exist

- Marking files optional/non-optional using the JSON-RPC interface was broken. Fixed

- Increased the recv buffer for requests in the JSON-RPC plugin from 64K to 512K.

  Should reduce the chance that clients get disconnected with a 'Too long request received' error

Changes in the Qt frontend:

- Added support to connect to a NNTPGrab Server

- Implemented the traffic monitor in the Qt frontend

- Made the "Don't show this dialog again" checkbox in the connect screen operational

- Added support for the Online Search

- Implemented the Automatic PAR2 and Unpack tab

- Implemented everything in the Configuration tab

- Completed the implementation of the 'Manage Plugins' window

- Automatically load all 'auto-load' plugins on startup

- Added the --debug command line parameter

- Implemented the tray icon

- Implemented automatic import

- Give the window a nice icon

- Hide the configuration parts for the JSON-RPC and Logger plugins when they aren't loaded

- Automatically save the download queue after a successfull NZB import

- Renamed the toolbar button 'Enable automatic shutdown' to

  'Automatic shutdown' to save some space

- Implemented the 'Automatic Shutdown' feature

- Automatically close the debug window (if it's visible) when the main window is closed

- Implemented showing/hiding columns in the download queue

- Implemented the 'hide inactive connections' configuration option

- Only allow the Qt frontend to be running once at the same time

- If another instance of the Qt frontend is detected, automatically give it focus

- Implemented opening NZB files from the command line

- Enabled showing the estimated time remaining and time to finish

  for all individual files in the download queue

- Show the download queue using a QTreeView instead of a QTreeWidget for bettter performance

- Fixed a bug where the calculation of the estimated time required

  didn't work correctly when having multiple collections

- A crash could occur in the Qt frontend when disabling one of the

  configured servers while a download is still active. Fixed

- Sanitize the collection name before importing files

- When marking a file which is currently being downloaded as 'skipped', the

  file size remaining wouldn't get reset. Fixed

- The 'Enable intelligent PAR2 downloader' configuration option was broken. Fixed

Changes in the GTK frontend:

- Re-added support to kill the NNTPGrab Server from a connected frontend

- Add support for libnotify 0.7

- Hide the configuration parts for the JSON-RPC and Logger plugins when they aren't loaded

- Fixed a deadlock which occured in the GTK GUI when the NNTPGrab Server

  disappears or when a protocol error occured

- When marking a file which is currently being downloaded as 'skipped', the

  file size remaining wouldn't get reset. Fixed

- When the connection to a NNTPGrab Server is lost, the program would

  disappear immediately. Changed this behaviour by showing an error dialog

  and waiting for the user to close it before closing the entire program

- Fixed some Gtk-Critical warnings in the GTK GUI which could occur

  on configuration changes

- Notifications were broken. Fixed

- Fixed a possible segfault while starting the GTK frontend

- When the configuration option 'hide inactive connections' is set in the

  GTK GUI then some invalid data could get shown in the connections

  overview (like messages belonging to another connection). Fixed

+-----------------+

| NNTPGrab 0.6.90 |

+-----------------+

Released at Sunday August 22 2010

- Added a new feature: Only download PAR2 files when needed. People upgrading from older

  versions of NNTPGrab may need to enable this feature in the configuration first. Feature #1

- Files can be marked optional/non-optional in the GUI by right-clicking on them and selecting the appropriate option

- Improved the performance of download queue manipulations by replacing the SQLite-based download queue with

  a custom file format. Download queues created with older versions of NNTPGrab won't get converted so

  make sure to complete your download queue before upgrading to this version. Feature #3

- Added a preview of a new NNTPGrab frontend written in Qt. This will replace

  the original GTK frontend on Win32/Win64 and Mac OS X environments as it

  provides a more native look and feel for those platforms. Thanks go out to

  chrashoverraid and tg1311 for helping out with this frontend! Feature #2

- The integrated search engine is operational again

- Added 'Select all' / 'Select none' buttons to the integrated search engine

- Show all possible connections in the connections overview instead of only the active

  ones (a configuration option has been added to restore the old behaviour)

- Dropped the GtkHTML dependency by rewriting the update check in the GTK GUI. Feature #19

- Added support for GTK 3 (and prefer it over GTK 2 when both are available)

- Added GObject-Introspection support which makes it easier to control NNTPGrab using different programming

  languages (like Javascript and Python). See https://live.gnome.org/GObjectIntrospection for more details

- Improved developer documentation by using gtk-doc. This can be found at https://www.nntpgrab.nl/embedded/nntpgrab/docs/index.html

- Dropped (optional) libgnome dependency

- Improved the handling of startup failures

- Added two new environment variables which can be used to influence some default

  settings: NNTPGRAB_CONFIG_DIR and NNTPGRAB_DEFAULT_DL_DIR. These environment variables

  are needed for environments like the Fonera. Feature #4

- Allow features to be disable in the ./configure script. Feature #30

- Fixed a compile error when using ./configure --disable-ssl

- Dropped the libxml2 dependency from the NNTPGrab Core to avoid bloat for embedded environments. Feature #30

- Before decoding files, make sure that the filename is in the UTF-8 charset. If this isn't

  the case try to convert the filename from Windows-1252 to UTF-8 first. Fixes #34

- Ensure that the output of par2cmdline is UTF-8 before processing it.

  Should fix 'unknown state for PAR2 message' notification which could occur on files

  which are in the Windows-1252 character encoding

- Read data from SSL connections in 16KB blocks. Should stabilize the connection a bit

- In some situations connections could hang at 99%. Fixed

- When disk space is low, the message 'nntpconnection.c:995 Unable to write article data to file: Success' could get shown. Fixed

- Fixed various memory leaks in the NNTPGrab Core which occured while importing files

- Fixed a possible race condition when using libproxy for the first time

- Added a workaround for a Win32-specific bug in par2cmdline which could

  cause the PAR2 repair progress bar to keep moving infinitely

- When par2cmdline exited unexpectedly, the progressbar in the GUI could keep going on. Fixed

- Don't automatically remove the PAR2 files when par2cmdline was aborted unexpectedly

- The program could crash on Linux environments when the user closes the program while a PAR2 repair is still active. Fixed

- The unrar program could hang infinitely when an error occured while unpacking. Fixed

- Only show messages in the terminal when the command line argument --debug is used or the environment variable NNTPGRAB_DEBUG is set

+----------------+

| NNTPGrab 0.6.2 |

+----------------+

Released at Saturday June 5 2010

- Added support for Windows x64

- When connecting to servers, keep the results of all DNS lookups in a cache so reconnecting can be done faster.

  This should also lower the possibility of the error message 'No hostname could be found for servername x' from occuring

- Automatically retry connecting to usenet servers when a connection error has occured

  This should fix a bug where the download queue could hang when the network connection is unstable

- Very small files could get stuck in the download queue. Fixed

- In a rare situation, the program could deadlock while trying to remove a file from the download queue. Fixed

- Really disable activating the automatic import on Mac OS X

- Don't use g_module_close() on Win32/Win64 as it causes a crash when the program is shut down

- When a network disconnect is discovered by the NetworkManager plugin, the download queue

  would always get stopped, even when the download queue was inactive. Improved the handling of this situation

- Don't wait for active decode actions to be completed before applying configuration changes

  This fixes a temporary hang or a deadlock which could occur when changing something in the configuration while a file is being decoded

- The download queue could get in an undefined state when applying multiple configuration changes very quick after each other. Fixed

- When using collection names > 128 characters some error messages could pop up while adding files or performing a PAR2 repair or an unpack. Fixed

- Renamed the configuration option 'Estimated end time' to 'Estimated time remaining' to avoid confusion. Fixes #31

- Added some more logging to improve the diagnosing of incomplete downloads

- When a collection name contains the text '.par2', all files get marked as par2 recovery files by par2cmdline.

  This resulted in the automatic remove function to remove all files in the collection. Added a workaround for this bug

- Compile fix for environments without GTK 2.12.0 or higher

- NZBCreator: Automatically deselect the checkbox of a collection when there are no items selected in it

- NZBCreator: Don't show expanders for collections with only one file

- NZBCreator: Show the poster for each collection if all the files in a collection were done by the same poster

- NZBCreator: When importing files using the NZBCreator, use a more generic collection name instead of the name of the first file

- NZBCreator: Perform the importing of files in a seperate thread to avoid that the GUI gets frozen for a few seconds

- NZBCreator: Fixed a memory leak which occured while importing files

+----------------+

| NNTPGrab 0.6.1 |

+----------------+

Released at Friday March 26 2010

- Added a hack which should prevent a crash on startup which several Mac OS X users were having

- An error message could get shown when trying to remove both an collection

  and a file within that specific collection at the same time. Fixed

- Files which are downloaded, but not yet decoded could remain stuck in the

  'Waiting for decoding' state. Fixed

- When adding files using the NNTPGrab Server which are smaller than 1024 bytes, an error

  message could get shown in the frontend. Fixed

- The download queue could get suspended when having multiple servers and all the

  items in the download queue aren't available on one of those servers. Fixed

- When an connection error occurs while downloading, the download queue could

  end up in an undefined state. Fixed

- When a collection doesn't contain any PAR2 files, no automatic unpack would happen. Fixed

- Also try to unpack .001 files when these are RAR archives

- Fixed a possible crash or strange behaviour when trying to remove files from the

  download queue while other files are being downloaded

- When a read timeout occurs on all active connections at the same time, the download queue

  could get suspended even when there still are tasks remaining. Fixed

- Disabled the automatic import options in the GUI for Mac OS X as this feature

  isn't implemented yet for Mac OS X environments

- Fixed various small memory leaks

+----------------+

| NNTPGrab 0.6.0 |

+----------------+

Released at Sunday March 7 2010

- Added support to automatically remove PAR2 files after a successfull recovery

- Added a preview of the integrated webinterface created by Flex1986. This can be reached

  on the address https://localhost:5423 after the JSON-RPC plugin has been loaded

  and the 'Enable embedded webserver' option has been enabled in the configuration

- When trying to download files on Mac OS X the program could crash. Fixed

- Added support for downloading using a proxy server on Win32 environments

- Suspend the download thread and abort all open connections immediately when

  there's nothing to download

- Don't try to auto-load plugins which are already loaded. This resolves error

  messages which could be shown when connecting to an NNTPGrab Server

- Don't build the auto_import plugin when GLib 2.16.0 or higher isn't available

- Don't build the PHP module by default anymore as it's obsoleted by the embedded webserver

- When adding files using the JSON-RPC plugin/NNTPGrab Server, the message-id's got malformed. Fixed

- The JSON-RPC event 'connection_disconnect' didn't send a correct 'reason' field. Fixed

- Fixed a reference count issue which could cause a segfault when executing

  the JSON-RPC method 'system.events'

- Fixed an invalid free in the JSON-RPC method 'system.events'

- The JSON-RPC event 'traffic_monitor_update' was broken on non-English locales. Fixed

- When removing all items from a collection but not the collection itself could

  result in the error message 'cannot commit - no transaction is active'. Fixed

- Fixed a possible deadlock while removing items from the download queue

- Small optimalisation while removing items from the download queue

- Improved the resize behaviour of the 'Manage plugins' window

+-----------------+

| NNTPGrab 0.5.91 |

+-----------------+

Released at Friday February 19 2010

== This is an unstable release! ==

- Added a Qt version of the NNTPGrab Server. This makes to program look more

  native on Win32 and Mac OS X environments

- Added a new feature: Automatically remove files after unpack (disabled by default)

- Implemented JSON-RPC over TCP

- Implemented the remaining JSON-RPC methods

- Ported the NNTPGrab Server and the Glue layer to use JSON-RPC over TCP

- Start the NNTPGrab Server (console) in the foreground by default

- Added the -h / --help arguments to the NNTPGrab Server (console)

- Listen on both IPv4 and IPv6 for the embedded webserver/JSON-RPC server

- Added a new plugin (created by crashoverraid) which prevents Win32

  environments from going to sleep while the program is running

- Fixed a bug in the JSON-RPC parser which could lead to 100% CPU usage

- Fixed a possible chrash in the JSON parser which could occur when trying

  to parse invalid data

- Fixed a warning in the NNTPGrab Server about the 'par2_repair_message' signal being unknown

- Always start the embedded webserver when using the NNTPGrab Server 

  (even if it's disabled in the configuration)

- Automatically escape the characters " and \ in JSON requests

- Only load plugins which are really required by default

- Show a notification in the GUI when a NZB file is imported by the NNTPGrab Server

- Automatically save any configuration changes which were done using the JSON-RPC plugin

- Downloading using a proxy server wasn't working correctly. Fixed

- Added support to download using a proxy server on Mac OS X environments

- If a log message with log_level NG_LOG_LEVEL_WARNING occurs then show a popup in the GTK GUI

- While decoding files an error message could be overwritten by another one

  resulting in an invalid error message. Fixed

- If files from a NZB containing invalid data is being decoded an invalid

  error message could occur. Fixed

- Fixed a bug where downloading could stop after one part

- Fixed a possible bug where the download queue wouldn't revive anymore when suspended

- Enable the tray icon by default on new installations (except on OSX)

- Fixed a small GTK warning in the GUI which could occur when viewing the list

  of available auto-import folders

- Only try to unpack files when a collection has been completely verified using PAR2

+-----------------+

| NNTPGrab 0.5.90 |

+-----------------+

Released at Saturday December 26 2009

== This is an unstable release! ==

- Improved the overall performance of the program by reducing the number of

  threads involved while downloading files

- Configuration changes are applied much faster than before

- The decoder has been rewritten for improved performance

- Saving of downloaded files is now more efficient because the need for

  a temporary dump file has been eliminated

- Don't bother checking the download queue when no servers are enabled

- The download thread will now automatically suspend itself when no new queued

  items have been found in the last 30 seconds. As soon as some activity happens

  in the download queue (adding or restarting tasks) the download thread will

  automatically be resurrected

- Several other optimalisations have been applied in the schedular, the

  download thread and the GTK GUI

- Make downloading using SSL more reliable

- Bandwidth limiting has been implemented

- The reliability of the speed monitor has been improved

- Support for downloading using proxy servers has been implemented

- Use GNOME's proxy settings for the update check and NZBCreator

  when they're available (Linux only)

- A plugin architecture has been implemented which makes it much easier

  to add new functionality to the program

- Automatically pause/resume the download queue when a network connection

  has been disconnected/resumed (Linux only)

- Added a plugin which automatically logs all debug messages to disk

- Added a plugin which allows NNTPGrab to be controlled using JSON-RPC

- The program can now also run on Fonera environments

- Added French translation

- Optimized the NNTPGrab Server by eliminating several regular expressions

- Fixed a possible deadlock caused by the PAR2 code

- Added a new ./configure option: --disable-ssl

- Don't search for libcurl when running ./configure --disable-gui

- Added a workaround for a bug in par2cmdline (the index file MUST have the

  extension .par or .par2)

- Added some code to prevent the database being opened by multiple threads

  at the same time as this can cause 'Database is locked' errors on Win32

- Moving items in the download queue to the bottom was broken with GTK 2.18.0 or higher. Fixed

+----------------+

| NNTPGrab 0.5.1 |

+----------------+

Released at Sunday July 19 2009

- In some rare situations, the schedular could get paused. This should be resolved now

- Fixed a possible crash in the unpack plugin

- When performing a PAR2 verify, an assertion error could appear. Fixed

- The progress bar in the PAR2 tab could get stuck when an unexpected error occurs

  while performing a PAR2 recovery

- Don't freeze anymore while manipulating the download queue or configuration

  when a connection error has just occured

- Prevent some memory corruption

- Prevent an invalid free

+----------------+

| NNTPGrab 0.5.0 |

+----------------+

Released at Monday June 29 2009

- Improved the automatic unpack GUI by showing the files which are currently being extracted

- Improved error handling in the automatic unpack

- Rewritten several parts of the Automatic Unpack plugin which are needed

  to prevent a console window being shown while unpacking on Win32 environments

- When a collection contains multiple PAR2 sets, the GUI could show a lot of assertion errors. Fixed

- When checking PAR2 files which belong to another PAR2 set, the progressbar in the GUI could get stuck. Fixed

- Don't bail out when decoding invalid yEnc messages. Solves the 'Unknown decode error occured, No error (0)' messages

- Reduce the required disk space on Win32 environments by using

  a small wrapper program for the executable nntpgrab_gui_debug.exe

- Dropped the cURL dependency for environments where libsoup 2.4 (or higher) is installed.

  This reduces the size of the installer on Win32 and Mac OS X environments

- The performance of decoding files should be slightly improved

- The NNTPGrab Server could freeze on old Linux environments when run in the background. Fixed

- Made the columns in the Repair and Unpack tab resizeable and repositionable

- Renamed the toolbar button 'Enable automatic shutdown' to 'Automatic shutdown' to prevent wrapping

- Automatic shutdown wasn't working on Mac OS X environments. Fixed

- Introduced an automatic snapshot generator which builds Mac OS X installers

  after each change done in the Subversion repository. These snapshots

  are published at https://www.nntpgrab.nl/snapshots

- Rewritten the speed monitor in the GUI to be more efficient

- The program could crash when performing a NZBCreator search with the minimum

  or maximum file size options set. Fixed

- Rewritten the processing of signals in the glue layer to be more efficient

- Made the download queue manipulation code more thread safe

- Several changes required for Win64 support

- Several memory leaks fixed

+-----------------+

| NNTPGrab 0.4.91 |

+-----------------+

Released at Tuesday May 5 2009

== This is an unstable release! ==

- Removing collections was broken. Fixed

- Don't allow the PAR2 repair and the automatic unpack to happen at the same

  time as both processes cause high I/O load

- Implemented the GUI for the PAR2 repair and automatic unpack

- Added an extra checkbox to the connect dialog in which the user can indicate

  whether they want to see the connect dialog the next time they run the program.

  This option can be reset from the configuration tab if wanted

- Allow the automatic unpack to be configurable from the GUI

- Added some optimalisations in the code responsible for moving files and collections

- The NNTPGrab Server can now be run in the background

- Added a new option to the main menu: Kill the NNTPGrab Server

  This option can only be activated when connected to a NNTPGrab Server

- The thread which is responsible for unpacking files could deadlock when

  corrupt files were being unpacked. This also caused the side-effect of the

  automatic shutdown not being triggered anymore

- Translations weren't working on Mac OS X. Fixed

- Opening .nzb files while the program wasn't running was broken on Mac OS X. Fixed

- Fixed a possible crash when pausing the download queue while one or more

  files are waiting to be decoded

- When the program was started, all files with the status 'Waiting

  to be decoded' would remain on that state forever. Fixed

- Simplified the installation of the PHP module on Win32 environments by

  eliminating all the external .DLL dependendencies

- In some situations, the program could crash on startup because of a 

  race-condition in the libxml2 initialisation. Fixed

- Fixed a small resource leak

- Compile fix for Linux environments where DBus isn't installed

- Compile warning in base/utils.c fixed

- The program didn't start when having a version of GTK+ older than 2.12.0. Fixed

- When starting the Standalone version of NNTPGrab on Linux, load

  the file libnntpgrab.so.0 instead of libnntpgrab.so

- The position of collections and files in the database could become inconsistent. Fixed

- When decoding, some filenames could get mangled. From now on, only really

  forbidden characters may get mangled in the filename

- When all the configured usenet servers are marked 'disabled', all remaining

  downloads would get changed to the status 'Not available'. Fixed

- Files in the download queue which are no longer on the usenet server anymore

  were always retried on startup on NNTPGrab while that shouldn't be happening. Fixed

- Added code to prevent the warning "passing a child setup function to the

  g_spawn functions is pointless on Windows and it is ignored"

- The files nntpgrab_gui.exe and nntpgrab_gui_debug.exe on Win32 were missing a icon

  and version information. This is now added. Should also solve the 'missing

  hicolor icon theme' message

+-----------------+

| NNTPGrab 0.4.90 |

+-----------------+

Released at Sunday March 15 2009

== This is an unstable release! ==

- Implemented automatic unpack which is performed after a collection

  is completely downloaded (and after the PAR2 verification/repair if

  there are PAR2 files in the collection)

- Added support to shut down the computer after all files are downloaded

  For Linux, this requires a recent Linux distribution (less than one year old)

  containing support for PolicyKit

- Merged the Networked GUI and the Standalone GUI in one program

- Improved the processing of output from the PAR2 process.

  For this version, this isn't visible yet in the NNTPGrab GUI, but

  this will be done in the next version of NNTPGrab

- Changed the name of the 'PAR2 Repair' tab to 'Repair and Unpack'

- Reduced the CPU usage when using large download queues

- When using large download queues, the memory usage could get very high.

  This was caused by in-efficient behaviour of libxml2. From now on

  the download queue will be maintained in a SQLite database.

  Download queues created using NNTPGrab 0.4.2 or below can't be used

  with this version anymore, so please complete your downloads with

  the old version of NNTPGrab before updating to this version

- Reduced the disk space required to install NNTPGrab on Win32 environments

  by stripping out unnecessary dependencies and unnecessary debug information

  This process isn't completed yet, so the required disk space will

  even be more reduced in later versions

- If a collection only contains files from the same poster, show this poster

  in the collection row in the download queue

- Servers can now be quickly enabled/disabled by clicking on the 'Enabled'

  checkbox in the Configuration tab without opening the 'Edit Server' window

- When double clicking on an already existing server in the Configuration tab

  the 'Edit Server' window will automatically be shown

- From now on there are two different NNTPGrab Server applications:

  The application 'nntpgrab_server' is always a console application (no GUI stuff involved)

  while the application 'nntpgrab_server_gui' is an GUI application (which won't be

  build when the ./configure --disable-gui option is given)

- Made it easier for application developers to create NNTPGrab frontends by

  removing the dependency on GLib in the public headers and libraries

- Improved the documentation in the public headers

- Show the download queue context menu when the right mouse button or

  the combination CTRL + left mouse button is used (Mac OS X only). Bugzilla #174

- Added the character ':' to the list of forbidden characters for collection names

- When performing an auto-import, also filter any forbidden characters in the collection name

- Small fix in the Win32 installer: the file libgmodule-2.0-0.dll is also required

  for the webinterface to work on Win32 environments

- When the system is under high load, the message 'Code should not be reached'

  could still popup when trying to import NZB files. This is caused by

  https://bugzilla.gnome.org/show_bug.cgi?id=538458

  To work around this, the timeout is increased from 3 seconds to 10 seconds

- Strip out any non-UTF8 characters coming from par2cmdline before presenting it to the frontends

- The program would keep on retrying downloading parts which contain no data instead of ignoring these empty parts. Fixed

- Merged the 'NZB Import' and 'Quick NZB Import' toolbar buttons in one with a drop-down list

- All the download queue manipulation is now done using a 'reference count' system

  This makes it possible to reduce the number of locks which should improve the 

  responsiveness of download queue manipulations

- Added support for compiling the program with GCC 4.4

- Added support for cross-compiling the program

- Introduced an automatic snapshot generator which builds Win32 installers

  after each change done in the Subversion repository. These snapshots

  are published at https://www.nntpgrab.nl/snapshots

- When using snapshots/subversion builds, the Subversion revision and build

  number are now shown in the Information tab

+----------------+

| NNTPGrab 0.4.2 |

+----------------+

Released at Saturday January 10 2009

- The most annoying bug of NNTPGrab up-to-date is the bug where importing

  a second NZB or importing a NZB from an external source (like a webbrowser)

  frequently fails with the message 'This code should not be reached'.

  This is caused by two bugs in GTK: https://bugzilla.gnome.org/show_bug.cgi?id=538458 

  and https://bugzilla.gnome.org/show_bug.cgi?id=355623

  These bugs aren't fixed yet in GTK, but a proper workaround has been found

  which shouldn't have any side effects

- Improve the reliability of the automatic NZB import by queueing up

  events triggered by the directory monitor and only process these

  events when they haven't changed in the last 3 seconds

- Disabling/enabling the automatic NZB import could cause a crash on Win32. Fixed

- While decoding, don't reopen the resulting file again for each part. This should

  improve compatibility with several virus scanners on Win32 environments

- The schedular could get automatically stopped with the message 'No such file or directory'

  when the decoder tried to decode a file which lacks the '=yend' tag. Fixed

- The download queue context menu items 'open download folder' and 'execute

  downloaded file' were broken on Mac OS X. Fixed

- The NZB import screen was showing a raw unix timestamp and the file size in bytes.

  This has been changed to a human-readable timestamp and a better readable filesize

- Some texts didn't got translated. Fixed

- Don't link against NSS when NSS is found, but nss_compat_ossl isn't found

- Fixed a memory leak in the NZB loading code

+----------------+

| NNTPGrab 0.4.1 |

+----------------+

Released at Monday December 29 2008

- The automatic PAR2 wouldn't start when the subject of the file is malformed.

  This is fixed by checking the file extension after each decode instead of

  relying only on the subject for the filename

- Before starting to decode files, test if the resulting directory can be opened.

  If this isn't possible, return an error message and pause the download queue

  to avoid files from getting lost

- As of NNTPGrab 0.3.0, connecting to IPv6 servers triggered a 'stack smashing

  attack' after which the program was automatically killed. Fixed

- The decoder could generate several empty files when there's no diskspace available. Fixed

- Improve error handling when saving files on async NFS shares

- Fixed a crash which occured when more than MAX_NNTP_SERVERS (10)

  servers are added in the configuration

- Raised the MAX_NNTP_SERVERS from 10 to 25 servers

- Fixed a possible compile failure

- Fixed a possible crash in the webinterface and the networked GUI

+----------------+

| NNTPGrab 0.4.0 |

+----------------+

Released at Sunday November 23 2008

- Added a new option to the configuration tab: enable PAR2 repair

- Only try to auto-import files with the .nzb extension

- When files were moved, they weren't detected by the auto-import. Fixed

- The program would crash while decoding multipart uu-encoded files

  From now on, all multipart uu-encoded files will always be incomplete (only

  the first part gets decoded).  This is due to limitations in yydecode

  where a proper fix requires more time

- When the schedular was paused, active files could get stuck in the 'now

  downloading' state. Fixed

- Renamed the file plugins/par2/plugin_par2.cpp to plugins/par2/plugin_par2.c as

  it was causing compile problems on pardus linux

- Visual Studio compile fix

- Use a custom variant of the popen function on Win32 environments.

  This should hide the par2repair command line window during repair

- Several memory leaks in the NZBCreator have been fixed upstream in libsoup,

  so remove the unnecessary free's from the NZBCreator code to prevent warnings like

  GLib-CRITICAL **: g_hash_table_unref: assertion `hash_table->ref_count > 0' failed

- The 'estimated time remaining' and 'estimed time to finish' could be shown

  for collections which were already fully downloaded. Fixed

- The generation of .rpt files containing crash reports on Windows was broken as

  of NNTPGrab 0.3.0. Fixed

- When the decoding of a file is done, notify the frontend about the resulting

  filename. Fixes bugzilla #166

- After each decode, change the current directory to the download

  folder itself (instead of the folder in which all the decoded

  files were placed) in order to prevent the NNTPGrab process from keeping

  the directory with the decoded files 'occupied' on Windows environments.

- On Windows environments, the decoding would always fail when the

  collection name contained special characters. Fixed

- If errors occur during the decode (due to corrupt or incomplete data), ignore these

- Small fix in the Linux shortcuts in order to conform better to the

  'Freedesktop Desktop Entry Specification'

+-----------------+

| NNTPGrab 0.3.93 |

+-----------------+

Released at Friday October 10 2008

== This is an unstable release! ==

- The program now shows whether downloaded files are fully complete,

  incomplete or not available at all

- Add the characters '(' and ')' to the list of forbidden characters in

  collection names due to a bug in par2cmdline

- Prevent the decoder from replacing any spaces with '_'

- Improved error processing in the decoder

- Prevent some false errors during the decode process

- The par2 repair wasn't started automatically anymore. Fixed

- Don't close the 'Adjust search parameters' section in the NZBCreator

  when no results are found during the search

- Fix an innocent warning which occured on GTK 2.14.0+ environments

- The decoder could mark the decoding as succeeded even when there was no

  disk space available. This problem happened on (async) NFS environments. Fixed

- The temporary files were deleted even if the decoding failed. This resulted in files

  having the 'Done' state. Fixed

- On decode errors, the error message 'Unknown decode error occured' was shown. This is

  now replaced with a more verbose message

+-----------------+

| NNTPGrab 0.3.92 |

+-----------------+

Released at Friday October 3 2008

== This is an unstable release! ==

- Rewritten the decoder by using yydeview instead of uulib.

  This fixes the bug where small files weren't decoded right

- If the decoder detects an incomplete files, the extension '.broken' is added to the filename

- On some Windows environments, the downloaded files would always be corrupt. Fixed

- Set the read timeout for NNTP connections to 30 seconds instead of 10 seconds.

  This should fix some unexpected disconnects on slow responding servers

- If a connection could not be made to the usenet server, reset the status

  of the file first before sleeping for 30 seconds so other download threads

  can retry downloading the file

- Compile fix for environments without GTK 2.10.0 or higher

- Don't verify the certificate in NNTP-over-SSL connections as several usenet

  providers (like Eweka) use self-signed certificates which breaks the verification

- Use the GTK function gtk_show_uri() to open the download folder and to execute

  downloaded files on environments with GTK 2.14.0 or higher

- Integrated the use_nss_compat_ossl patch in the regular build

- The Windows setup.exe was missing some files required for the webinterface. Fixed

+-----------------+

| NNTPGrab 0.3.91 |

+-----------------+

Released at Saturday September 13 2008

== This is an unstable release! ==

- Delete the selected files from the download queue when the  button is pressed

- When importing NZB files, remember the directory from which a NZB file was imported and

  automatically go to this directory the next time the user wants to import a NZB file

- Don't hide the window when the tray icon isn't shown

- On connection errors, sleep the download thread for 30 seconds and

  push the part back in the queue

- Don't mark parts as being downloaded on connection errors

- The decoder couldn't decode some files on Win32 environments

  (this resulted in 'No such file or directory' error message). Fixed

- Prevent the user from using illegal characters like *, !, " and ' for

  collection names

  as they cause issues when used as a path name

- Reverted commits 948 and 952 as they caused a regression with importing .nzb

  files from external sources (like a webbrowser) while using GTK 2.13.6 or higher

- The GUI of the NNTPGrab Server could freeze due to the use of

  some GTK functions in a different thread. Fixed

- Hide the NNTPGrab Server GUI on startup problems (unable to bind to port)

  (Previously the GUI would stay in a frozen state for a few seconds)

- Start the 'par2.exe' command from the same directory as the nntpgrab executable on Win32.

  This should fix the problem where sometimes the 'par2.exe' command could not be found

- Catch any error messages (stderr) from the 'par2' process and show them in the frontend

- Fixed a possible compilation failure which occured when libsoup isn't detected

- Fixed a possible crash when pressing the 'Cancel' button in the NZB Import dialog

- If the operating system supports both IPv4 and IPv6, listen on both in the NNTPGrab Server

- Initialisation errors in the NNTPGrab Server GUI could get lost. Fixed

- On Fedora and Win32, the NSS library is now used instead of OpenSSL for communication

  with usenet servers over SSL

- Collections containing non-UTF8 characters weren't repaired on Win32. Fixed

- Opening the download folder of collections and executing downloaded files

  containing non-UTF8 characters wasn't working on Win32. Fixed

- The menu items and the download queue context menu needed 2 clicks before they

  were shown on Win32. Fixed

+-----------------+

| NNTPGrab 0.3.90 |

+-----------------+

Released at Friday August 22 2008

== This is an unstable release! ==

- Added support for automatic NZB import. A folder can be monitored by the

  program and if an .nzb file is placed in this folder, the file will

  automatically be read and added to the download queue. Folders can be

  monitored on both the local computer and on the NNTPGrab Server. This feature

  requires GLib 2.16.0 or higher, but is unsupported on Mac OS X for the moment

- Added support for the NZBCreator service. This is a usenet search service

  which is fully integrated in the program. It is possible to search for

  files on the usenet using several filters and to import search results

  directly into the NNTPGrab download queue

- Added support for automatic PAR2 repair. After a collection is fully

  downloaded all the available PAR2 sets in the collection are verified

  using the external program 'par2cmdline'. Support for this feature is

  very basic at the moment due to various reasons, but will be improved

  in later versions of NNTPGrab

- Several new functions added to the PHP module:

  nntpgrab_connections_get_speed_history

  nntpgrab_utils_strip_subject

  nntpgrab_utils_calculate_file_size

  nntpgrab_utils_calculate_estimated_time_remaining

  nntpgrab_utils_get_readable_time_remaining

  nntpgrab_utils_get_readable_finished_time

- Added a GUI for the NNTPGrab Server (won't be used when ./configure --disable-gui

  is used or no graphical environment is running)

- In the NNTPGrab Server, when the program could not listen on port 5423, an

  popup dialog is now shown (when the GUI is enabled)

- Lowered total memory usage by using GSLice instead of malloc

- Reorganised the code infrastructure of the project in preparation for future features

- Use GIO functions to read NZB files on environments with GLib 2.16.0 or higher

  as this is more efficient

Contributions by Icheb and FrodoBaggins:

- Started work on a traffic monitor in the webinterface. This isn't

  visible yet in the webinterface

+----------------+

| NNTPGrab 0.3.3 |

+----------------+

Released at Saturday August 9 2008

- The list of available download folders wasn't generated when the 'config_changed' signal

  was already emitted. Fixed

- When generating the list of available download folder, the 'please wait' dialog could be blank. Fixed

- Fix a small memory leak

- Fix a possible deadlock which could occur when the schedular was paused and

  more than one file were waiting to be decoded

- When decoded files can't be saved, always stop the schedular

- When the state of the schedular changes (with an error message), show a notification balloon

- When the program is minimized and a NZB file is opened from an external program, deiconify

  the program first before handling the NZB file. This might fix the following error message

  which some users were having:

  file nzb.c: line 644 (on_filechooserNZB_file_set): should not be reached

- The message 'The list of available download folders is now being updated. Please wait a few seconds' could

  remain visible after changing the download or the temp folder. Fixed

- Show a popup message when the user tries to add a server with a servername which is already used

- Disable 'type-ahead-find' in the configuration tab as it could cause an assertion failure 

- NZB files opened from external sources sometimes didn't get shown. Added an ugly workaround for it

+----------------+

| NNTPGrab 0.3.2 |

+----------------+

Released at Saturday July 19 2008

- The NNTPGrab Server would always give an error message indicating the

  function 'freeaddrinfo' could not be found on Windows 2000 environments. Fixed

- When closing the 'Connect to NNTPGrab Server' dialog from the Networked GUI,

  the program would keep running. Fixed

- On connection errors in the Networked GUI, shut down the program properly

  instead of triggering the 'error reporting' facility

- The opening of .nzb files sometimes fails. On Mac OS X the program could

  even crash when opening an .nzb file (using the Finder) while the

  program isn't running yet. NNTPGrab Bugzilla #161

- Replaced the use of GStaticRWLock in the schedular by GStaticMutex.

  This should solve some locking problems

- Added a start menu shortcut for the NNTPGrab Server (Linux only)

- Several compilation fixes which are required to run NNTPGrab on older Linux environments

- The program wouldn't compile using Visual Studio without running the ./configure script. Fixed

- The calculation of the total_file_size and total_file_size_remaining in the

  webinterface was sometimes miscalculated. Reported by Chrashoverraid. Fixed

- When adding new files using the Networked GUI or the Webinterface, a crash could occur. Fixed

- The traffic monitor didn't work in the networked GUI and the webinterface on

  environments where GLib 2.14.0 or higher isn't installed. Fixed

- Add support for using NNTP-over-SSL with Astraweb

- NNTP-over-SSL connection problems were handled incorrectly. Fixed

- When decoding files, convert the filename to the utf-8 character encoding before saving it.

  This prevents the NNTPGrab download queue from getting corrupt. Bugzilla #163

- Updated the Configuration GUI so that everything in the interface is more consistent

- If a collection name contains invalid UTF-8 data, replace it with a space

- NZB files containing special characters couldn't get imported on Windows. Fixed

- Improved translations

- Some texts didn't got translated, Fixed

+----------------+

| NNTPGrab 0.3.1 |

+----------------+

Released at Wednesday June 11 2008

- On Windows, the program remained visible on the taskbar when using the tray

  icon functionality. Fixed, https://bugzilla.gnome.org/show_bug.cgi?id=537183

- When NNTPGrab 0.3.0 is run for the second time, all the download columns in

  the download queue could be hidden. Fixed

- The estimated time remaining and estimated time to finish of entire collections

  became invalid on large collections (4GB+) or large download queues. Fixed

- There was a possible race condition where multiple NNTPConnection objects

  could get initialized at the same time, resulting in strange error messages

  like "GLib-GObject-ERROR **: g_type_plugin_*() invalidly modified type

  'NNTPConnection'". This race condition is now fixed

- Small optimalisation in the generation of the download folder listing

- Don't build the list of available download folders everytime the program

  starts, only do this when the user actives this configuration - download folders tab.

- Show a small popup dialog while the list of download folders is being built

  (on Mac OS X this can take up to 10 seconds due to automount). Bugzilla #158

- When opening .nzb files, add them to the 'recently used files' list in the

  filechooser and the desktop environment (the latter for Linux only)

- Produce more sane error messages on Windows when a connect timeout occurs

  (fixes the 'No error' message)

- Fixed a small memory leak in the NNTP plugin

- Connections could keep hanging in the 'Idle' state. Fixed

- The 'connection_disconnect' signals wasn't emitted on all connection errors. Fixed

- On Windows, several error messages could get lost (or be 'No error'). Fixed

- Lowered the read timeout to 10 seconds. This should tackle usenet servers

  which take a very long time to respond on authentication failures, like Eweka

- The behaviour of the setsockopt function (to set timeouts) is different on Windows.. Fixed

- On startup, several 'There is no disk in the drive' dialogs could pop up on Windows. Fixed

- On uninstall of the Win32 version some files remained installed. Fixed

+----------------+

| NNTPGrab 0.3.0 |

+----------------+

Released at Saturday June 1 2008

- On connection failures, stop trying after 5 seconds. This change

  also causes the schedular to pause more quickly and the server

  configuration to process changes faster

- Added a filter to the NZB import filechooser component, so that by default

  only .nzb files are shown. An option to show all the files is also added

- On fresh installations, the download and temp directory weren't set

  up correctly. Fixed

- On fresh installations, no columns/contents were shown in the download

  queue. Fixed

- In the download and temp folder chooser component, perform a scroll and

  expand only if it was triggered by another frontend

- Opening .nzb files on Mac OS X while NNTPGrab wasn't running

  yet caused to NZB Import dialog to be blank. Fixed

- Small memory leaks fixed

+-----------------+

| NNTPGrab 0.2.91 |

+-----------------+

Released at Monday May 26 2008

== This is an unstable release! ==

- Added support for marking usenet servers as enabled/disabled

- Improved the installation directory discovery for Win32 environments

- The .nzb file associaton was broken for Win32. Fixed

- Several Visual Studio fixes

- The configuration of the download and temp folders should now work fine on Windows

- Disable drag&drop in the download queue as it is broken

- Added some hacks to get the PHP module to compile on OSX

- In some webserver environments, the webinterface could show some PHP code

  to the client. Fixed

- Search for the NNTPGrab plugins in the right folder (fixes 64bit

  /usr/lib64 compatibility)

- Use sane default values when the subject of a file could not be parsed

  successfully during the NZB import

- Prevent the user from running both the NNTPGrab Server and the Standalone

  GUI at the same time

- Create crash reports on Win32 when the NNTPGrab Server crashes

- On Win32, if the error WSAETIMEDOUT is triggered, keep trying again until

  a real timeout has occured

- Moved the Winsock initialisation to the main.c of the GUI and the NNTPGrab Server

- The NZB Import dialog could cause an (GTK internal) assertion error. Fixed

- Destroy the tray icon on shutdown of the GUI

- Removed a lot of unused code

- Lowered the memory usage by using fixed-size structures for all the signal processing

- Check for program updates from a seperate thread. Bugzilla #158

- Only show the notification-bubbles configuration when it is supported

+-----------------+

| NNTPGrab 0.2.90 |

+-----------------+

Released at Saturday May 17 2008

== This is an unstable release! ==

- Added support for downloading from multiple servers with multiple threads

- Each server can be assigned a priority (high, normal, low), so that parts

  are downloaded first from servers with a high priority before servers with

  a lower priority are tried

- Priority of items in the download queue can be changed

- Addition of network glue layer so frontend and backend can be seperated

  Due to this layer it is now possible to perform the downloads on another

  computer than the computer where the GUI is running

- Added the NNTPGrab Server. This program runs in the background and

  executes commands from the Networked GUI and the webinterface

- Added a Networked GUI, which is the same as the normal GUI, but can

  be used to control a NNTPGrab Server (running on a different computer)

- Added a PHP module with which the NNTPGrab server can be controlled

- Added a (basic) webinterface which uses the PHP module to communicate

  with the NNTPGrab Server

- Added support for a tray icon

- File association with .nzb files

- The file size remaining, estimated time remaining and estimated time to

  finish are now shown in the GUI

- The columns shown in the download queue can now be turned on and off

- Added support to drag-drop the columns in the download queue

- Improved Mac OS X integration

- New ./configure option added: --disable-gui. With this option set, the GUI

  won't be build and the GUI-specific configure tests will be skipped

- The plugins are now installed in $prefix/lib/nntpgrab instead of $prefix/lib

- The configuration tab of the GUI is fully redesigned

- Small optimalisation in the speed monitor, only redraw the graph when the

  GUI is shown. Ignore speed monitor updates when the GUI is hidden/minimized

- Added Visual Studio 2008 project files

- When importing NZB files, select all the files by default

- Detect if the NNTPGrab GUI is already running and if so, give focus

  to this already running instance

- If a file is being decoded and the resulting filename already exists, then

  the resulting file will be renamed so it contains a suffix and the original

  file remains intact

- Provide more user-friendly error messages on possible initialisation errors

- Validate the input in the server configuration dialog before saving it

- Don't use recv() calls with the MSG_PEEK flag anymore as this was causing

  problems (like kernel warnings about race conditions). Instead, use a buffer

  for all the received data and only read new data when necessary

- Don't keep the traffic monitor lock longer than necessary. Should better

  stabilize the traffic monitor while decoding files

Thanks to the following contributors:

- slazh, creating the webinterface

- Icheb, adding ajax support to the webinterface

- PascalW, providing code for .nzb file association under OSX

- Dr3am3r, bugreports, testing of the PHP module and NZB import for the webinterface

+----------------+

| NNTPGrab 0.2.5 |

+----------------+

Released at Tuesday April 29 2008

- The program could crash while decoding files. Fixed

- The total size of collections didn't got updated when a task was removed. Fixed

- The program could crash when there was no free disk space anymore to

  save downloaded parts. Fixed

- Fixed a small compiler warning

+----------------+

| NNTPGrab 0.2.4 |

+----------------+

Released at Saturday March 1 2008

- The program would always crash when using GTK 2.12.7 or higher. Fixed

- Fix a off-by-one error which could cause the program to crash while downloading

- Fix possible deadlock

- Don't send 'traffic_monitor_update' signals when there hasn't been any

  traffic for the last 10 seconds. Lowers the CPU usage when there aren't

  any downloads active

- During the program update check, the program will now check if there are

  new unstable versions available and notify the user about this

+----------------+

| NNTPGrab 0.2.3 |

+----------------+

Released at Saturday February 2 2008

- In some situations, the decoder component could crash. Fixed

- Only send a 'part_progress_update' every 1/10th second instead of for

  every 10KB of data received to lower the CPU usage

- Only write every 128KB of received data to the disk instead of for every

  chunk of data received

- Catch possible errors which can occur while saving the downloaded parts

- Several small memory leaks solved

- On Windows Vista the decoding would always fail with the message 'Invalid argument'. Fixed

+----------------+

| NNTPGrab 0.2.2 |

+----------------+

Released at Sunday Januari 27 2008

- In the Windows installation script, check if NNTPGrab is still

  running when the (un)installation program is started

- Drastically lower the memory usage in the NNTP code by using mmap'ed files

- Possible race condition during the initialisation of the program solved

- When the decoding is finished, try to rename (move) the decoded file first instead of copying

- Menu items didn't get translated when using GTK 2.12.0 or higher. Fixed

- The program would crash when the servername of an already existing server was changed. Fixed

- Possible endless loop fixed in the NNTP download code

- Strip any newline characters from messages which need to be pushed to the frontends

- Errors during the downloading of the parts could get lost by some compilers. Fixed

- Prevent a double free and a small memory leak

- Possible crash while changing the configuration fixed

- Another endless loop in the NNTP plugin should be solved. This should solve

  the 100% CPU usage and the freezes when trying to shutdown NNTPGrab

- Incorporated fixes and optimalisations from the PAN project to the uulib decoder component

- Possible crash which could occur on decoding errors fixed

- When there are decode errors and the users wants to remove the file

  which triggered the decode error, a deadlock would occur. Fixed

- Under Linux environments, the File Chooser component in the configuration

  part of the program could show wrong data. Hopefully fixed (might be a GTK bug)

+----------------+

| NNTPGrab 0.2.1 |

+----------------+

Released at Wednesday December 26 2007

- Possible crash in the NNTP plugin solved

- On Windows, NNTP connections were often reset while no errors had occured. Fixed

- Small bug in the update notification component fixed

+--------------+

| NNTPGrab 0.2 |

+--------------+

Released at Tuesday December 25 2007

- Quick NZB Import button added

- Context menu added to the download queue with the options 'Remove item(s)

  from download queue', 'Restart selected item(s)', 'Open download folder' and

  'Execute selected file'

- CPU usage lowered by using a hash table in the list with active connections

  (Bugzilla #145)

- Traffic monitor implemented. This traffic monitor shows the traffic of the

  last 10 seconds and the average speed of the last 3 seconds

- Donate button added

- NNTP-over-SSL implemented

- When importing a NZB file, you can now select to which collection the

  NZB should be added

- Connection-timeout-detection added

- Assertion error in the function 'part_download_start' solved

- Assertion error in the function 'connection_disconnect' solved

- Connection-reset-detection added. This fixes the behaviour where all the

  tasks in the download queue could be marked as 'done', while these aren't

  downloaded yet

- On decoding errors, a popup message is shown mentioning what went wrong

- Possible crashes during initialization of the program fixed

- Possible crash in the configuration object solved

- Program/start-menu icon added. Created by ArmiDuctor

- Some interface improvements in the NZB Import window

- Default position of all the windows changed to 'center on parent'

- Error messages occuring on read and write errors could get lost. Fixed

- When importing a NZB file for a second time without closing the window, all

  the previous NZB data would remain visible. Fixed

- When NNTPGrab was shut down while a decode still needed to take place, the

  decode would not occur the next time NNTPGrab was started. Fixed

- Don't remove the part-files on decode errors

- Added a seperate configure-check for the program 'msgfmt' to work around

  a bug in intltool 0.36.2 (or lower) which could cause compile problems

- Some 64bit platform fixes

- Possible deadlock while trying to remove items from the queue fixed. Bugzilla #152

- The program wasn't able to connect to some usenet servers like 'usenetserver'. Fixed

- When importing NZB files, the .nzb extension is stripped from the filename

  and this name is used (by default) for the collection name.

+--------------+

| NNTPGrab 0.1 |

+--------------+

Released at Thursday November 29 2007

- First release